2443 Braga Drive Broadview, IL USA 60155-3941
tel: 800 842 7668 708 345 2050
fax: 708 345 2225
- Products
- Applications
- Information
- Contact Us
- Links
 |
 |
 |
 |
| Features & Benefits |
| Typical Applications |
| Specifications |
| Part Number Cross Reference |
Series 9 to 26 Micro/Level®
Isolators and Press Mounts
With load ratings to 135,000 lbs. (60.000 daN) and natural frequencies as low as 10 Hz, these vertical leveling screw, elastomer isolators are very effective at isolating transmitted impact forces generated by stamping presses weighing as much as 450,000 lbs. (200.200 daN).
The horizontal properties of these isolators are very effective in the anchorless installation of Die Cast Machines and Plastic Injection Molders.For larger, heavier stamping press installations,
MXL, MXLP, MXBP, MXBN Micro/Level Isolators and Isolation Elements, or SVS, SVX, or SVXN Viscous Damped Coil Spring Isolators can be used depending on your installation requirements.
Cross-section of a 20 Series BFM Isolator
Among the features are a super-strong one-piece, ductile-iron housing; a high-strength steel bearing plate; a heat-treated adjustment screw that provides precision leveling and alignment; and a custom-engineered and compounded elastomer that effectively reduces harmful vibration. Our elastomers are designed and applied to prevent creeping or packing down, so your machine stays level and aligned.