VIBRO/DYNAMICS® Corporation

Manufacturers of technologically advanced vibration isolators, machine mounts, and vibration and shock control systems since 1964

2443 Braga Drive Broadview, IL USA 60155-3941
tel: 800 842 7668 708 345 2050
fax: 708 345 2225

MXBP & MXBN Isolation Elements

Vibro/Dynamics MXBP and MXBN Isolation Elements are designed for the free-standing support of large stamping presses and other equipment weighing from 13 to over 2270 metric tons (30,000 to over 5 million lbs.).

These low-cost press isolation systems use the same modular elastomers used in other Vibro/Dynamics' vibration and shock isolators. This modular, multiple layer isolation technology combined with expert Application Engineering results in high-performance, trouble-free installations. 

Unlike "pad material" installations, MXBP and MXBN Isolation Elements offer superior support, machine level and elevation stability, and predictable isolation performance. Dynamic natural frequencies as low as 8 Hz can be achieved, resulting in very effective vibration and shock isolation.

Press leveling is accomplished using a specially designed "Shim Pak", consisting of alternating layers of steel sheet and anti-slip materials. To make leveling and shim insertion easier, the MXBP models have built-in hydraulic cylinder pockets to raise the machine foot off of the element.

Vibro/Dynamics also offers a Hydra/Level Service that includes cylinders, pumps, and supervisory assistance.

mxbp
mxbp
 
mxbn
mxbn